Installing The Reader Heater; Checking The Contents; Turning Off The Host Machine; Installation Procedure - Canon iR7086 Series Service Manual

2.6 Installing the Reader Heater

2.6.1 Checking the Contents

iR7105 / iR7095 / iR7086

2.6.2 Turning Off the Host Machine

iR7105 / iR7095 / iR7086

2.6.3 Installation Procedure

iR7105 / iR7095 / iR7086
1) Open the ADF.
2) Remove the 2 screws [1] and detach the glass retainer [2].
3) Remove the copyboard glass [3].
[1] [2]
[1] Mirror heater
[2] Lens heater
[3] Cable clamp
[4] Heater harness retainer
[5] Screw (RS tightening;
M4X8)
Turning Off the Main Power
When turning off the main power, be sure to go through the following in
strict sequence to protect the machine's hard disk:
1) Hold down on the power switch on the control panel for 3 sec or more.
2) Operate on the touch panel according to the shut-down sequence
indicated so that the main power switch may be turned off.
3) Turn off the main power switch.
4) Disconnect the power cable (for the power outlet).
[3]
F-2-195
FK2-0229-000 1 pc.
FK2-0228-000 1 pc.
WT2-0507-000 2 pc.
FC5-2945-000 1 pc.
XB3-6400-805 4 pc.
[1]
[3] [2]
F-2-196
[4] [5]
Chapter 2
0011-8534
0011-8536
0011-8567
2-51