The Smart Access - Canon Oce Colr Wave 500 Operation Manual

The Smart Access

The Smart Access
Introduction
The Smart Access is the dynamic lower section of the user panel. The Smart Access is dynamic
and its functionality changes when you select the copy, scan or print tile.
To start a job, you only have to:
1. Insert an original for scan and copy jobs, or select a print job from one of the locations, e.g.
Smart Inbox in the Smart Access.
2. Select the number of copies and tap the green button in the Smart Access to start the job.
NOTE
For more information on the workflow of basic copy, scan, and print jobs see,
job on page
The Copy Smart Access
Tap the copy tile on the user panel to view the copy Smart Access. The Smart Access has the
following functionalities:
Component
1. numeric panel
2. [live scan view]
3. [green button]
The Scan Smart Access
Tap the scan tile on the user panel to view the scan Smart Access. The Smart Access has the
following functionalities:
Component
1. locations
2. [live scan view]
3. [green button]
46 Chapter 2 - Get to Know the Printing System
57, Do a default scan job on page
Function
Select the number of copies.
Check how your document is being scanned by the printer.
You can check the width and alignment of the original to ensure best
performance.
Tap the green button to start the job.
Function
Select the location you want to send your scanned file to.
You can swipe through the list of various locations, from Smart Inbox-
es, USB, to cloud locations.
For more information on how to configure the locations, see
and open a Smart Inbox for scan jobs and print jobs on page 96
Create an external location on page
Check how your document is being scanned by the printer.
You can check the width and alignment of the original to ensure best
performance.
Tap the green button to start the job.
58, and Do a default print job on page
129.
Do a default copy
59.
Create
and
4