Move The System - Canon Oce Colr Wave 500 Operation Manual

Move the system

Move the system
Introduction
You can move the printer to a new location.
Before you begin
IMPORTANT
• When the printer is connected, you must first switch off and disconnect the printer (see
the printing system off on page 22
cable on page
• Close the media drawers.
NOTE
Be aware of the size of the printer working area (see
page 19).
Procedure
1.
Pull with both hands to remove the left side cover.
2.
Pull at the left foot cover to remove it.
3.
Push the handle [1]. The foot snaps up [2].
24 Chapter 2 - Get to Know the Printing System
and
331).
Disconnect the network cable and the mains supply
Printer working area (Footprint) on
Switch