The Delivery Destination - Canon Oce Colr Wave 500 Operation Manual

The delivery destination

Introduction
The Océ ColorWave 500 is delivered with a [Top Delivery Tray (TDT)] to collect your printed
output.
The [Top Delivery Tray (TDT)] can collect 50 - 100 plain paper prints with a maximum length of
1200 mm, 48 inch. The media type you use influences the output capacity.
In Océ Express WebTools you can define the default [Print delivery] for your printed output. To
set the default [Print delivery], select the [Preferences] - [Print job defaults] tab.
• If you use 2 inch media cores instead of the standard 3 inch media cores, the printed output is
automatically delivered at the back of the printer. The installation of one of the finishing
options is then advised.
• Some media require a specific output delivery. For example heavy media or media that
requires a manual cut can automatically be delivered at the back of the printer. This is defined
in the properties of the media type.
• If you select [Top Delivery Tray (TDT)] your printed output is by default delivered in the
standard [Top Delivery Tray (TDT)].
• If you select [Back output] your printed output is by default delivered at the back of the printer.
In that case you can expand your printer with one of the following finishing options.
Chapter 2 - Get to Know the Printing System
The delivery destination
35