Set The Default Scan Preset - Canon Oce Colr Wave 500 Operation Manual

Set the default scan preset

Set the default scan preset
Introduction
With a preset you can predefine the settings you need for a scan job.
Scan has two preset categories: [File] and [Original]. For each category you can set one default
preset in Océ Express WebTools. The default preset is automatically used when you press the
green button on the user panel.
NOTE
• Depending on the color mode and file type you select, the values for the compression mode
and organization change. For more information on the correct settings, see
page 271
• You can always find a short explanation of the setting in the tooltip.
Procedure
1.
Open the [Preferences] - [Scan job defaults] tab.
2.
Under [User panel configuration: Default presets for scan] select the preset category you want to
change, for example [Default File preset].
3. Select the setting you want to use as the default preset, for example [JPEG].
Select [Custom] to make your custom preset default.
4. Click [Ok] to confirm, or [Cancel] to reject your entries.
After you finish
To make sure your preset is active on the user panel, press the home button on the home screen
of the user panel.
122 Chapter 3 - Define your Workflow with Océ Express WebTools
.
File type on