Table of Contents
Advertisement
Advanced settings for copy jobs
Setting
[Area to
erase]
Preset category: [Finishing]
Setting
[Delivery]
246
Chapter 4 - Use the Printing System
Settings
Settings values
values
[Area to
From 0 to 914 mm,
erase: X
or 0 to 36 inches
origin]
[Area to
From 0 to 6000 mm,
erase: Y
or 0 to 250 inches.
origin]
[Area to
From 0 to 914 mm,
erase:
or 0 to 36 inches.
width]
[Area to
From 0 to 6000 mm,
erase:
or 0 to 250 inches.
length]
Settings values
[Top Delivery Tray]
[Back output] or [Fold].
[Fold template]
Function
[The origin of the area to erase on the horizon-
tal axis, starting from the left.]
[The origin of the area to erase on the vertical
axis, starting from the top.]
[The width of the area to erase.]
[The length of the area to erase.]
Function
Location on top of the printer that deposits the
sheet face-down.
NOTE
Not all media types can be delivered
to the [Top Delivery Tray].
Select the [Back output] to deliver your output
face-up, at the back of the printer.
Select the folding device when it is configured,
and you want to fold your output.
When a folding device is configured, you can
select the preferred fold template, to fold with
predefined settings.
Advertisement
Chapters
Table of Contents
