Advanced settings for scan jobs
Setting
[Remove strip]
[Mirror]
266
Chapter 4 - Use the Printing System
Settings values
[Top]
[Bottom]
[Left]
[Right]
[On]
[Off]
Function
[Erase a strip from the beginning of the origi-
nal.]
From 0 to 400 mm, or 0 to 16 inches.
[Erase a strip from the bottom of the original.]
From 0 to 400 mm, or 0 to 16 inches.
[Erase a strip from the left side of the original.]
From 0 to 400 mm, or 0 to 16 inches.
[Erase a strip from the right side of the origi-
nal.]
From 0 to 400 mm, or 0 to 16 inches.
[When "On", the image is mirrored along the
vertical axis (the media transport direction).]
Set to [On] for strongly curled transparent
originals that have to be fed upside down in
the scanner. Or for (dark) transparent originals
that have the information printed on the back.