The Folding Device (Optional); Switch The Folding Device To Manual Operation And Back - Canon Oce Colr Wave 500 Operation Manual

The folding device (optional)

The folding device (optional)
Introduction
The printer can be delivered with an external folding device. The Océ ColorWave 500 is
compatible with the Océ 2400 fanfold and the Océ 4311 fullfold.
NOTE
• A technician is required to install the folding device and configure the system.
• For more information on folding devices, visit
product.
Media compatibility with the folding device
The following media are compatible with the folding device:
• Plain papers: 60- 110 g
• Vellum, Translucent and Tyvek: fold quality depends on used media

Switch the folding device to manual operation and back

Introduction
The Océ 2400 fanfold and the Océ 4311 fullfold are integrated in the system.
You can use the folding device also as a stand-alone folding device.
NOTE
For more information about the folding devices, see the separate operation manual of the
folding device.
Online mode versus manual mode
The folding device is connected to the back of the printer. If you want to operate the folding
device manually, the connecting part (to the printer) could cause a paper jam on the table.
If you switch to manual mode, then the connecting part will move downwards to clear the
entrance for the paper.
Online mode
38 Chapter 2 - Get to Know the Printing System
"http://downloads.oce.com"
Manual mode
and select your