Power On And Off - Polycom realpresence group 300 User Manual

User Guide for the Polycom RealPresence Group Series and the Polycom Touch Control
Polycom RealPresence Group systems, accessories, and the Polycom Touch Control
Note: Options Are Configured By Your Administrator
Polycom RealPresence Group systems and Polycom Touch Control can be configured to show only
those options used in your organization. Therefore, this guide might cover options that you cannot
access on your system. To find out more about these options, please talk to your administrator.

Power On and Off

Powering your system on and off is a simple procedure, but it is important to perform the tasks in a certain
order. Make sure that the system is powered off before you connect devices to it. After you have connected
all of the related equipment that you will use, connect the power and power on the RealPresence Group
system.
It is important to note that Polycom RealPresence Group 300, 500, and 700 systems do not have what you
might think of as a power button—they have a power proximity sensor. Instead of pressing an actual button
that moves, you touch the sensor (or near the sensor) that indicates power
To power on the RealPresence Group System:
Do one of the following:
● Press any button on the remote control, or pick up the remote control to wake up the system if it is
asleep.
Polycom, Inc.
on the front of the system.
10