Jenn-Air FCE10610 Use And Care Manual page 41

To removepull forwardto the "stop"position; __
lift up on the frontof the rack and pull out.
Before replacing bulb, disconnect power to oven at the main fuse or circuit breaker
pane/. Besurethatthe entireovencavityincluding the lightbulbiscoolbeforeattempting
to remove,
TO replace light bulb
1. Carefullyunscrewthe glass lightlens.
2. To obtainfirm graspon bulb,wear protective rubbergloves.
Removebyturningbulbto the left. Do not touch a hot oven
light bulb with a damp cloth as bulb will break. Note: If the J"
bulbdoes breakand youwishto removeit, be certainpower
supplyis disconnectedand wear protectivegloves. You
Y
maycontactyourauthorizedJenn-AirServiceContractor f or
service.
3. Replace bulb with a 40 watt oven-rated appliance bulb. A
bulb with brass base is recommendedto preventfusingof
bulb into socket.
4. Replace bulb cover and reconnectpower to oven. Reset
clock.
Before replacing light bulb, DISCONNECT POWER TO RANGE.
To replacefluorascent s urfacelight: Grasp Top _,.a_ o ==
the top trim of backsplash with thumbs BACKGUARD FLLIORESCENT'FUIE
underfrontedge and gently pulloutward
whileliftingto releasetrimfromcatchesat
each end.
Remove bulb and replace w_than f8 watt
fluorescent tube. Snap top trim backinto
place, restorepower and reset clock.
41