Table of Contents
Advertisement
Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
Step 4 To remove an Ethernet connector, press the locking key and pull out the connector, as shown in
Figure
Figure 5-57 Removing an unshielded Ethernet connector
----End
Installing Fiber Connectors
Context
l After you remove the dustproof cap, ensure that the fiber pins are clean and install them as
l When you disassemble fiber connectors, you must use a dedicated tool if the connectors are
Cleaning Fiber Connectors
Procedure
Step 1 Clean the pins of a fiber connector by using lint-free cotton and alcohol.
Step 2 Clean the pins again by using dust-free cotton. If necessary, clean the pins by using an air gun.
Ensure that the pins are free from any fiber or debris.
----End
Issue 02 (2014-12-05)
5-57.
NOTICE
soon as possible.
densely installed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
76
Hide quick links:
Advertisement
Table of Contents
