Huawei AP8030DN Installation And Maintenance Manual page 57

Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
----End
Assembling the Cord End Terminal and the Power Cable
Context
Figure 5-11
Figure 5-11 Components of a cord end terminal and a power cable
A. Cord end terminal
Procedure
Step 1 Based on the cross-sectional area of the cable conductor, strip a part of the insulation. The L1-
long conductor is exposed, as shown in
in Table
When you strip a power cable, do not damage the conductor of the cable.
Figure 5-12 Stripping a power cable (cord end terminal)
Issue 02 (2014-12-05)
shows the components of a cord end terminal and a power cable.
B. Insulation layer of a power cable
5-3.
NOTICE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
C. Conductor of a power cable
Figure 5-12. The recommended values of L1 are listed
5 Appendix
51