Table of Contents
Advertisement
Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
l Connect the optical fiber correctly; otherwise, the optical fiber may be damaged.
l Bundle the optical fibers with binding tapes every 1 m.
Connecting network cables
1.
2.
3.
Issue 02 (2014-12-05)
NOTICE
Use a shielded straight-through cable. Cut the cable into a proper length based on the
distance between the AP and the PSE device, strip the cables on both ends, and crimp the
wires into RJ45 connectors.
Make a network cable onsite according to pin assignment in
communication quality is affected even if devices can be connected.
Table 2-3 Pin assignment
X1 Pin
1
2
3
4
5
6
7
8
NOTE
Actually, APs use shielded straight-through network cables, which are connected in the same way
as unshielded network cables.
Put the network cable through waterproof PG connectors. Connect the RJ45 connector to
the ETH/PoE interface on the AP and secure the waterproof PG connector. See figures b,
c, and d.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Wire Color
White and orange
Orange
White and green
Blue
White and blue
Green
White and brown
Brown
2 AP Installation
Table
2-3. Otherwise, the
X2 Pin
1
2
3
4
5
6
7
8
27
Hide quick links:
Advertisement
Table of Contents
