Huawei AP8030DN Installation And Maintenance Manual page 80

Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
Figure 5-52 Installed shielded Ethernet connector
Step 4 To remove an Ethernet connector, press the locking key and pull out the connector, as shown in
Figure
Figure 5-53 Removing an shielded Ethernet connector
----End
Installing an Unshielded Ethernet Connector
Procedure
Step 1 Hold the male and female connectors, with the male connector facing the female connector, as
shown in
Issue 02 (2014-12-05)
5-53.
Figure 5-54.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Appendix
74