Fax & Phone Problems Rap - Xerox Phaser 3200MFP Service Manual

Status Indicator RAPs
17 Fax & Phone Problems RAP
17A No Dial Tone
Description
There is no dial tone when the Manual Dial key is pressed.
Check and Cause
1. Check that the telephone line cord supplied
with the set is connected to TEL LINE cor-
rectly.
2. Listen for a CLICK sound when the Manual
Dial key is pressed.
Note: Key sound must be set to "on" in
User Mode.
3. Check the connection of the HARNESS
between the LIU and the Main Board.
4. Ensure the speaker is connected correctly.
2-26
1. If the telephone cord is OK but there is no
dial tone, try plugging a normal telephone into
the wall socket. If this is OK then replace the
LIU PBA:
- PL 1.0
- PL 1.1
2. If you cannot hear the Manual Dial CLICK
sound, the OPE Assembly may be defective.
Check and install a new OPE assembly,
GP 3,
5.0 if necessary.
3. Check the Speaker connection and the har-
ness between the LIU and the Main PBA.
Install new cables as necessary:
- PL 1.0
- PL 1.1
4. Perform Tech mode,
Check and install new parts as necessary
• Speaker
- PL 1.0
- PL 1.2
• Main PBA
- PL 1.0
- PL 1.1
04/07
Solution
(Workcentre PE220)
(Phaser 3200).
(Workcentre PE220)
(Phaser 3200).
GP 4 - Modem Test.
(Workcentre PE220)
(Phaser 3200)
(Workcentre PE220)
(Phaser 3200)
Phaser 3200MFP / Workcentre PE220
PL