9. Unplug the Connector from the ADF PBA
and remove 4 screws securing the ADF
motor housing and remove it in the direc-
tion of the arrow, Figure 8.
Figure 8
Replacement
Replacement is the reverse of the removal
procedure.
Phaser 3200MFP / Workcentre PE220
REP 10 OPE Unit
Parts list on
Note: The illustrations show the Workcentre
PE220 but the procedure is identical for the
Workcentre PE220 and Phaser 3200.
Switch off the electricity to the machine. Dis-
connect the power cord from the customer
supply while performing tasks that do not
need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Open the ADF housing and insert a flat-
blade screwdriver into the crack and
remove the OPE Unit from the platen
housing, Figure 1.
04/07
Repairs/Adjustments
PL 5.0
WARNING
Figure 1
4-15