IQ 9 Ghost (1)
Description
Ghost occurs at 75.5 mm intervals of the OPC drum on the print.
Phaser 3200MFP / Workcentre PE220
Check and Cause
1. Bad contacts caused by contamina-
tion from toner particles between high
voltage terminal in the main body and
the electrode of the Developer.
2. The life of developer is expired.
3. Transfer roller lifetime (50.000
sheets) has expired.
4. Abnormal low temperature (below
10°C).
5. Bad contacts caused by contamina-
tion from toner particles between high
voltage terminal in the main body and
the one in the HVPS board.
04/07
Image Quality
Solution
1. Clean the terminals.
-
PL 1.0
(Workcentre PE220)
-
PL 1.1
(Phaser 3200)
2. Install a new toner cartridge:
-
PL 1.0
(Workcentre PE220)
-
PL 1.1
(Phaser 3200)
3. Check the life of the transfer
roller.
Check and install a new transfer
roller if necessary:
-
PL 6.0
(Workcentre PE220)
-
PL 8.1
(Phaser 3200).
4. Wait about 30 minutes after
power on before using the machine.
5. Check and install new parts as
necessary:
•
Main PBA
-
PL 1.0
(Workcentre PE220)
-
PL 1.1
(Phaser 3200)
•
HVPS
-
PL 1.0
(Workcentre PE220)
-
PL 1.1
(Phaser 3200)
3-11