Xerox Phaser 3200MFP Service Manual page 45

17B Defective MF DIAL
Description
The MF DIAL is not functioning.
Check and Cause
1. Check that the telephone line cord supplied
with the set is connected to TEL LINE cor-
rectly.
2. Listen for a CLICK sound when a key is
pressed.
Note: Key sound must be set to "on" in
User Mode.
3. Check the connection of the HARNESS
between the LIU and the Main PBA.
4. Ensure the speaker is connected correctly.
Phaser 3200MFP / Workcentre PE220
1. If the telephone cord is working and there is
no dial tone, try plugging a normal telephone
into the wall socket. If the telephone is work-
ing, then install a new LIU PBA:
- PL 1.0
- PL 1.1
2. If you cannot hear the Manual Dial CLICK
sound, the OPE Assembly may be defective.
Check and install a new OPE Assembly,
GP 3,
5.0 if necessary.
3. Check the Speaker connection and the har-
ness between the LIU and the Main PBA,
Install new parts as necessary:
- PL 1.0
- PL 1.1
4. Perform Tech mode,
Check and install new parts as necessary:
• Speaker
- PL 1.0
- PL 1.2
• LIU PBA
- PL 1.0
- PL 1.1
• Main PBA
- PL 1.0
- PL 1.1
Note: Product supports MF DIAL type only.
04/07
Status Indicator RAPs
Solution
(Workcentre PE220)
(Phaser 3200)
(Workcentre PE220)
(Phaser 3200)
GP 4 - Modem Test.
(Workcentre PE220)
(Phaser 3200).
(Workcentre PE220)
(Phaser 3200).
(Workcentre PE220)
(Phaser 3200).
PL
2-27