Table of Contents
Advertisement
3.5.2.2
Inserting a Micro SD Card
1.
Unscrew the four screws on the camera main body to remove the black housing.
2.
Insert the micro SD card to the micro SD card slot.
3.
Screw back the black housing.
3.5.2.3
Restoring to Factory Default
There are two ways to restore all of the camera's settings to factory default values: 1. Click the
Default button on the Maintenance settings page, please refer to 7.9.4 Maintenance. 2. Press the
Reset Button on the camera main body, shown as below:
10
EPN4230d/4230di
Advertisement
Table of Contents
