Table of Contents
Advertisement
8. Upgrading Firmware Using IP Utility
You can upgrade the Firmware using the IP Utility software included in the software CD or from the
Website of Everfocus (click here to download).
1.
Install and then start the IPU program
automatically search the IP devices connected in the LAN.
2.
Log in the camera by checking the desired model and then click the Log in
dialog box appears.
3.
Type the Username and Password. Click the OK button, the Login status displays.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.
3. Up to 10 cameras can be simultaneously upgraded to the latest firmware. If you connect
the cameras to a PoE switch, please make sure the Power Consumption of the PoE switch
is sufficient.
, the following IPU window appears. The IPU will
96
EPN4230d/4230di
icon. The Log in
Advertisement
Table of Contents
