Inserting A Micro Sd Card; Restoring To Factory Default - EverFocus EPN4122 User Manual

3.5.2.2

Inserting a Micro SD Card

1. Unscrew the four screws on the camera main body to remove the black housing.
2. Insert the micro SD card to the micro SD card slot.
3. Screw back the black housing.
3.5.2.3

Restoring to Factory Default

There are two ways to restore all of the camera's settings to factory default values: 1. Click the
Default button on the Maintenance settings page, please refer to 7.9.4 Maintenance. 2. Press the
Reset Button on the camera main body, shown as below:
EPN4122/4122i/4220/4220i/4220p/4220pi
Micro SD
Card Slot
Press the Rest Button to
restore to factory default.
9