Table of Contents
Advertisement
8. Put on the supplied gloves before pushing upward the main body into the top housing. Draw
out the provided rope from the housing and hook it on the rope attachment hook of the main
body.
9. Make sure the red triangle
the outside of the main body. Push the main body upward into the top housing until the orange
catches on both sides click into position.
Note:
1. To release the main body, press the two orange release buttons on both sides. Make sure
you are holding the main body firmly, otherwise it will fall down.
2. To protect the glass dome from getting dirty and scraped up, please put on the supplied
gloves before installing.
on the inside of the top housing lines up with the red triangle on
17
EPN4230d/4230di
Advertisement
Table of Contents
