Table of Contents
Advertisement
Load: To load a previously saved video configuration, press the Browse button to locate the saved
config. file (see above) and then click the Load button. The system's settings will be restored to the
saved video configuration.
【Video Format】Select NTSC or PAL for your local scanning system. Click Apply to save the setting.
【Upgrade Firmware】Click the Browse button to find a previously prepared firmware upgrade file.
Click Upgrade to install the new firmware.
Note:
1.
Do not disconnect power to the unit during the upgrade sequence. The unit will reboot
automatically after the upgrade has completed (1‐5 minutes).
2.
During the upgrade process, all event recording actions will be stopped. Event recording
actions will resume after the camera is rebooted.
3.
If the "File Error, Please re‐login!!" warning message appears when upgrading the firmware,
please try the following instructions:
a. Go to Internet Explorer > Tools > Internet Option > Security > Custom.
b. Find and enable the Include local directory path when uploading files to a server.
93
EPN4230d/4230di
Advertisement
Table of Contents
