Table of Contents
Advertisement
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
Note:
1.
In order to support the full functionality of the camera, you must open the port numbers (80,
554, 443) on the router for remote access to the IP camera. This function is available on most
routers in the market and is often known as "Port Forwarding". To set up Port Forwarding,
please consult the manual of the router.
2.
In certain router models, it is possible that you will not be able to access the camera using
DDNS while inside the router's network. Please try using a PC located outside of your router's
network.
Default Ports on All EverFocus IP Cameras:
HTTP: 80
RTSP: 554
HTTPS: 443
47
EPN4230d/4230di
Advertisement
Table of Contents
