EverFocus EPN4230d User Manual page 49

【Date/Time Format Used in Text】Click the dropdown menu to select date/time format from the
listed options. Click on the desired hour format. Click Apply to apply the changes or Cancel to cancel
the changes and return to the previous settings. To enable displaying the date and time information
on the Live View Window, you have to check the Date/Time box in the Text Settings field above.
【Recording / Snapshot Export Settings】
Enable Event Recording to PC: Check this box to record the event recordings to the user's PC.
Export Folder: Select the Export folder for the action above by clicking on the browse
and then select the desired folder.
File size: The user can limit the size of each recorded file here (in minutes). Once you click the Record
button on the Live View window, the camera will start recording the live stream to your computer.
When a single recording file exceeds the time you set, the system will create a new file to save that
data to.
Overwrite: Select "ON" for overwriting recording/snapshot file when the disk storage capacity is full.
The user can set the storage capacity limitation in the in-sentence field in the gray box below the
Overwrite setting: "If the remaining hard disk capacity is less than ____ MB (50~2000), system will
stop recording or start overwriting. "
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
【Language Settings】To add a new language not listed in the current Language list, click the Browse
button to locate the new language file (.evb) on your computer and then click the Upload button.
Updated language files might be available on the manufacturer's website. Contact your vendor if
required.
Click Apply to apply the changes or Cancel to cancel the changes and return to the previous settings.
Note: Uploading a new language file will cause the system to reboot automatically. Please create a
new network connection to the IP camera when the reboot is complete.
43
EPN4230d/4230di
button,