Table of Contents
Advertisement
EPN4230d/4230di
Power Up Func.: Select the mode that the system will revert to when a power failure occurs. Available
options of this field are OFF, POS.1 (H) (the Preset position "1"), TOUR1, PAT.1 (Pattern "1"), AUTOPAN and
PREV.MODE.
Auto Flip: Select ON to tilt the camera by 180° using the direction controls on the PTZ Control window.
Owing to the mechanical design, the camera will tilt 90° first, and then the camera will flip by 180 degrees,
after that, go down to 180° (see image below). Select OFF to disable the Auto Flip function and the camera
will be tilted by 90°.
°
°
0
180
°
180
71
Advertisement
Table of Contents
