Table of Contents
Advertisement
To set up an Auto Pan Sequence:
1. Click the Program button next to Set Auto Pan, the following Preset panel appears.
2. Using the direction buttons to adjust the camera view to a desired position where you want to set
up the position as the Left Position. You can select the pan / tilt speed from the PT Speed
drop-down list for controlling the direction buttons. Adjust zoom, focus and Iris if necessary.
3. Click the Set button next to Set Left Pos to save the current position as the Left Position.
4. Follow Step 2 to set up the Right Position and then click the Set button next to Set Right Pos.
5. Select Off from the Endless Mode drop-down list.
6. Enter a speed at which the camera will move during the Auto Pan sequence.
7. Enter a dwell time for the Left and Right positions (the time that the camera will pause at each
position).
8. Click Apply to apply the settings.
To activate the configured Auto Pan function, on the Live View window, click the Open button in the
PTZ Control field to display the PTZ Control window. Click the Auto Pan button, click "1" on the numeric
buttons and then click the Go button. The camera will continuously move to the left and right positions
which you have configured. Click "2" on the numeric buttons and then click the Go button will force the
camera to pan 360
endlessly.
°
68
EPN4230d/4230di
Advertisement
Table of Contents
