Detaching And Refitting The Heat Roller - Olivetti d-copia 1800 Service Manual

2KL/2KK

(5) Detaching and refitting the heat roller

Follow the procedure below to replace the heat roller.
Procedure
1. Separate the right and left fuser unit (see
page 1-5-42).
2. Remove the fuser heater (see page 1-5-44).
3. Remove the heat roller separation claws
(see page 1-5-47).
4. Press the heat roller bush in the rear side of
the right fuser unit from outside to make the
roller removable.
5. Remove the heat roller, heat roller bush and
heat roller gear.
Caution
Remove the heat roller, with the heat roller
bush in the front side being mounted.
1-5-48
Right fuser unit
Service Manual
Heat roller bush
Right fuser unit
Figure 1-5-80
Heat roller
Heat
roller bush
Figure 1-5-81
Heat
roller gear
Y110980-1