Fitting The Scanner Wires - Olivetti d-copia 1800 Service Manual

2KL/2KK

(2-2) Fitting the scanner wires

NOTE
When fitting the wires, be sure to use those specified below.
Machine front: (P/N: AVGR00575W), gray
Machine rear: (P/N: AVGR00574S), black
Fitting requires the following tools
Two frame securing tools (P/N AVGR03672L)
Two scanner wire stoppers (P/N 417928N)
Procedure
1. Remove the rear cover.
2. Remove the screw and remove the scanner
wire drum gear from the rear side of the
machine.
3. Remove the stop ring and bush.
1-5-22
Hook
Both
Service Manual
Right middle cover
Screw
Right middle cover
Both
Figure 1-5-38
Bush
Stop ring
Scanner wire
drum gear
Figure 1-5-39
Screw
Hook
Screw
Y110980-1