(2) Detaching and refitting the scanner wires
Take the following procedure when the scanner wires are broken or to be replaced.
(2-1) Detaching the scanner wires
Procedure
1. Remove the exposure lamp (see page 1-5-
17).
2. Open the left cover.
3. Release six hooks and both and then
remove the left middle cover.
4. Release five hooks and two bothes and then
remove the left upper cover.
Y110980-1
Left middle cover
Hook
Left upper cover
Both
Service Manual
Hook
Hook
Hook
Hook
Left middle cover
Both
Figure 1-5-32
Left upper cover
Both
Hook
Hook
Hook
Hook
Hook
Figure 1-5-33
2KL/2KK
Hook
1-5-19