Messages In The Multifunction Display; Advanced Parking Guidance; Blind Spot Assist - Mercedes-Benz 2010 CL-Class Operator's Manual

216_AKB; 3; 90, en-US
d2ureepe,
Display messages
Blind Currently
Spot Unavailabl
Assist e See
Oper.
Manual
Blind Inoperativ
Spot e
Assist
Parking Currently
Guidance Unavailabl
e See
Oper.
Manual
Vehicle status messages in the multifunction display
Possible causes/consequences and X Solutions
The Blind Spot Assist is deactivated because the area around
the sensors in the front or the rear bumper is dirty.
X
Clean the front and rear bumper (
The Blind Spot Assist is deactivated because the battery
voltage is insufficient.
X
Have the battery checked at an authorized Mercedes-Benz
Center.
The Blind Spot Assist is switched off because the radar sensor
system is temporarily inoperative due to electromagnetic
interference near television and radio transmitter stations,
toll stations, speed measuring systems, etc.
X
Wait until the message in the multifunction display
disappears.
The Blind Spot Assist is malfunctioning.
X
Contact an authorized Mercedes-Benz Center as soon as
possible.
The Advanced Parking Guidance is deactivated because the
area around the sensors in the front or the rear bumper is
dirty.
X
Clean the front and rear bumper (
The Advanced Parking Guidance is deactivated because the
battery voltage is insufficient.
X
Have the battery checked at an authorized Mercedes-Benz
Center.
The Advanced Parking Guidance is switched off because the
radar sensor system is temporarily inoperative due to
electromagnetic interference near television and radio
transmitter stations, toll stations, speed measuring systems,
etc.
X
Wait to see if the interference is temporary. Try in a location
where the interfering source might not be present.
2009-05-15T11:47:50+02:00 - Seite 423
Version: 2.11.8.1
Y page 406).
Y page 406).
423
Z