Multifunction Display; Warning Messages In The Multifunction Display - Mercedes-Benz C-Class Operator's Manual

Warning!
The BabySmart
ONLY work with a special child seat designed to
operate with it. It will not work with child seats
which are not BabySmart
Never place anything between seat cushion and
child seat (e.g. pillow), since it reduces the
effectiveness of the deactivation system.
Follow the manufacturer's instructions for
installation of special child seats.
The passenger front airbag will not deploy only if
the ü indicator lamp remains illuminated.
Please be sure to check the indicator every time
you use the special system child seat. Should the
light go out while the restraint is installed, please
check installation. If the light remains out, do not
use the BabySmart
on the front passenger seat until the system has
been repaired.
Malfunction and warning messages
Instruments
Operation
and controls
TM
airbag deactivation system will
TM
compatible.
TM
restraint to transport children
Instrument
Driving
cluster display
Malfunction and warning messages in the

multifunction display

Malfunction and warning messages for the following
systems will be displayed immediately in the
multifunction display.
They are divided into three categories.
Category C1:
Messages of most immediate priority.
These cannot be cleared from the instrument cluster
using the reset knob on the instrument cluster (see
page 100).
Categories C2 and C3:
Messages of less immediate priority.
These can be cleared from the instrument cluster using
the reset knob on the instrument cluster (see page 100)
and are then stored in the malfunction message
memory. See page 119.
293
Practical hints Car care
Technical
Index
data