Replacing Smartkey Batteries; Manually - Mercedes-Benz 2010 CL-Class Operator's Manual

216_AKB; 3; 90, en-US
d2ureepe,
Unlocking the driver's door
X
Insert mechanical key ; into the driver's
door lock.
X
Turn mechanical key ; counterclockwise
to position 1.
X
Pull the door handle past the resistance
point until the locking knob moves up.
The driver's door is unlocked.
X
Pull the door handle once more to open the
driver's door.
X
Turn mechanical key ; back and remove
it from the driver's door lock.
Unlocking the trunk
A minimum height clearance of 5.9 ft (1.8 m)
is required to open the trunk lid.
X
Insert mechanical key ; into the trunk lid
lock.
X
Turn mechanical key ; counterclockwise
to position 1.
2009-05-15T11:47:50+02:00 - Seite 461
Version: 2.11.8.1

Replacing SmartKey batteries

! When you open the trunk, the trunk lid
swings open upwards. Always make sure
there is sufficient overhead clearance.
X
Turn mechanical key ; back and remove
it from the trunk lid lock.
Locking the vehicle
If you cannot lock the vehicle with the
SmartKey or with KEYLESS-GO, lock it as
follows:
X
Open the passenger door.
X
Close the driver's door and the trunk.
i If you cannot close the trunk with the
remote trunk opening/closing switch,
lower the trunk lid manually and close it
with hands placed flat on the trunk lid until
it is engaged in its lock.
X
Press down the locking knob of the driver's
door.
X
Press down the locking knob of the
passenger door.
! To prevent inadvertent lockout, make
sure to have the SmartKey with you before
proceeding with the next step. The next
step will lock the vehicle.
X
Exit the vehicle.
X
Lock the trunk with the mechanical key
Y
( page 261).
X
Close the passenger door.
i This procedure does not arm the anti-
theft alarm system, nor does it lock the fuel
filler flap.
Replacing SmartKey batteries
If the batteries in the SmartKey are
discharged, the vehicle can no longer be
locked or unlocked. It is recommended to
have the batteries replaced at an authorized
Mercedes-Benz Center.
461
Z