Night View Assist; Messages In The Multifunction Display - Mercedes-Benz 2010 CL-Class Operator's Manual

216_AKB; 3; 90, en-US
d2ureepe,
Vehicle status messages in the multifunction display
438
Display messages
STOP Car
¨
Too Low
Malfunctio
¨
n
Night
Á
View
Assist
Inoperativ
e
Night
Á
View
Assist
Currently
Unavailabl
e
Night
Á
View
Assist
Lights
Must Be
Set to
AUTO or ON
Night
Á
View
Assist
Not In
Reverse
Gear
Possible causes/consequences and X Solutions
The AIRMATIC is malfunctioning.
X
Avoid excessive steering maneuvers. The fenders or tires
could otherwise be damaged. Listen for scraping noises.
X
Stop and press the vehicle level control switch to select a
higher vehicle level ( Y
X
Do not drive faster than 50 mph (80 km/h).
X
Contact an authorized Mercedes-Benz Center as soon as
possible.
There is otherwise danger of an accident.
The capability of the AIRMATIC system is restricted. This can
impair the handling.
X
Do not drive faster than 50 mph (80 km/h).
X
Have the vehicle checked at an authorized Mercedes-Benz
Center.
The Night View Assist is malfunctioning.
X
Contact an authorized Mercedes-Benz Center as soon as
possible.
The temperature of the Night View Assist camera is too high
( Y page 333).
X
Wait until the message Night View Assist Available
Again appears.
In addition you can:
X
Swing the camera cover down (
X
Adjust the air distribution of the climate control so that air
flows upward ( Y page 195).
You have tried to switch on Night View Assist, but the exterior
lamp switch is not set to c or L.
X
Turn the exterior lamp switch to c or L
( Y page 275).
You have tried to switch on Night View Assist while the
automatic transmission was in reverse gear R.
X
Shift the automatic transmission to park position P, neutral
position N or drive position D (
2009-05-15T11:47:50+02:00 - Seite 438
Version: 2.11.8.1
page 317).
Y page 407).
Y page 291).