Activating/Deactivating - Mercedes-Benz 2010 CL-Class Operator's Manual

216_AKB; 3; 90, en-US
d2ureepe,
Failure to observe these guidelines could
cause the vehicle to skid. The ESC cannot
prevent accidents resulting from excessive
speed.
For more Information, see (
X
Start the engine.
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
ESC function
X
Press button a.
X
Press button a again if you would like
to change the current status.
Depending on the previous status, ESC will
be Enabled or Disabled
G
Warning!
When the ESC OFF warning lamp å is on,
the ESC is switched off.
When the ESC warning lamp ÷ and the
ESC OFF warning lamp å are on
continuously, the ESC is not operational due
to a malfunction.
When the ESC is switched off or not
operational, vehicle stability in standard
driving maneuvers is reduced.
Adapt your speed and driving to the prevailing
road conditions and to the non-operating
status of the ESC.
Instrument cluster control system
Activating/deactivating PRE-SAFE
Brake (vehicles with DISTRONIC PLUS
only)
X
Press button = or ; to select the
DriveAssist menu.
Y page 59)
X
Press button : or 9 to select the
PRE-SAFE Brake function.
X
Press button a.
X
Press button a again if you would like
to change the current status.
After the function has been activated,
PRE-SAFE
on the left-hand side of the multifunction
display. When the HOLD function is
switched on, the PRE-SAFE
indicator Ä will not appear.
For more information on PRE-SAFE
see (
Switching Blind Spot Assist on or off
X
Press button = or ; to select the
DriveAssist menu.
X
Press button : or 9 to select the
Blind Spot Assist function
X
Press button a.
2009-05-15T11:47:50+02:00 - Seite 213
Version: 2.11.8.1
®
Brake indicator Ä appears
®
Y page 62).
213
®
Brake
®
Brake,
Z