Mercedes-Benz 2010 CL-Class Operator's Manual page 202

216_AKB; 3; 90, en-US
d2ureepe,
COMAND seats
200
X
Slide or rotate
ZVÆ
setting is reached.
X
Saving setting: Press W.
Adjusting seat backrest sides
This function is used to adjust the air
chambers in the seat backrest sides.
X
Select seat ( Y page 198).
X
Selecting Seatback Sides: Slide
rotate cVd.
X
Confirming selection: Press W.
A scale appears.
X
Slide or rotate
ZVÆ
setting is reached.
X
Saving setting: Press W.
Adjusting seat backrest curvature in
lumbar area
This function is used to adjust the air
chambers in the lumbar area of the seat
backrest.
X
Select seat ( Y page 198).
X
Selecting Lumbar: Slide
cVd.
X
Confirming selection: Press W.
A cross hair appears.
You can use it to make two settings:
vertical: shift the point of greatest
R
curvature upward or downward
horizontal: adjust the degree of
R
curvature
until desired
cVd
or
ZVÆ
until desired
cVd
or rotate
XVY
2009-05-15T11:47:50+02:00 - Seite 200
Version: 2.11.8.1
X
Slide or until desired setting is
ZVÆ XVY
reached.
X
Saving setting: Press W.
Adjusting seat backrest curvature in
shoulder area
This function is used to adjust the air
chambers in the shoulder area of the seat
backrest.
X
Select seat ( Y page 198).
X
Selecting Shoulders: Slide
cVd.
X
Confirming selection: Press W.
A scale appears.
X
Slide or rotate
ZVÆ cVd
setting is reached.
X
Saving setting: Press W.
Drive-dynamic function
The drive-dynamic multicontour seat
electronically controls the air pressure in the
air chambers of the seat backrest side
or rotate
XVY
until desired