Mercedes-Benz 2010 CL-Class Operator's Manual page 78

216_AKB; 3; 90, en-US
d2ureepe,
COMAND introduction
76
X
Switching to the next higher menu:
Press back button % briefly.
COMAND switches to the next higher menu
level within the currently active operating
mode.
X
Switching to the main menu: Press and
hold back button %.
COMAND switches to the main menu of the
currently active operating mode.
Basic functions
i The components and operating principles
of COMAND can be found on (
Sound
X
Muting: Press button 8 on the
multifunction steering wheel
( Y page 202).
The sound of the current audio source is
switched on or is muted.
i When the sound is muted, symbol 8
appears in the status line. When you
change the audio source, the sound is
switched on automatically. Navigation
announcements will be audible even when
the sound is muted.
Switching navigation announcements off
X
Press button 8 on the multifunction
steering wheel during an announcement.
i The announcements remain switched off
even when you start a new route guidance
or switch COMAND off/on with the u
button. When you switch COMAND off by
removing the SmartKey from the starter
switch and then switch the ignition back on
after more than 3 minutes, the
announcements are switched back on
automatically.
X
Switching navigation announcements
back on manually: Select Navi Q RPT
( Y page 122).
2009-05-15T11:47:50+02:00 - Seite 76
Version: 2.11.8.1
Adjusting volume
X
Adjusting: Turn thumbwheel H.
or
Y page 68).
X
Press button W or X on the
multifunction steering wheel.
Volume of navigation announcements
You can adjust the volume of navigation
announcements independently of the
respective audio source volume.
During a navigation announcement:
X
Turn thumbwheel H.
or
X
Press button W or X on the
multifunction steering wheel.
You can recall a navigation announcement
manually.
X
Select Navi Q RPT.
Adjusting volume for telephone calls
In hands-free mode, you can adjust the
volume of a telephone call while the call is
active.
During a telephone call:
X
Turn thumbwheel H.
or
X
Press button W or X on the
multifunction steering wheel.