Mercedes-Benz 2010 CL-Class Operator's Manual page 225

216_AKB; 3; 90, en-US
d2ureepe,
Speak the command "Navigate (to)" and
the first and last name in any order. This
applies to other functions of address book
entries also.
Sample dialog:
\ Navigate to John Smith.
If more than one address exists for this
voice name, the Voice Control System
will prompt you:
^ Navigate to home or work?
\ Work.
^ John Smith work.
Starting route guidance.
"Start route guidance"
Use the command "Start route guidance" to
start route guidance after entering a valid
destination.
Sample dialog:
\ Start route guidance.
^ Starting route guidance.
Route guidance begins.
"Route Information"
You can use the "Route Information"
command to get the following information on
your currently planned route read out:
Distance to destination
R
Remaining driving time
R
Expected arrival time
R
"Guidance instructions on"
Use the command "Guidance instructions on"
to enable the system's guidance voice output.
The Voice Control System repeats the current
guidance instructions.
"Guidance instructions off"
Use the command "Guidance instructions
off" to mute the system's guidance voice
output.
2009-05-15T11:47:50+02:00 - Seite 223
Version: 2.11.8.1
Voice Control System navigation
"Cancel route guidance"
Use the command "Cancel route guidance"
to cancel route guidance.
Sample dialog:
\ Cancel route guidance.
^ Are you sure you want to cancel route
guidance?
\ Yes.
Route guidance is canceled.
or
\ No.
^ Cancel.
The dialog with the Voice Control System is
canceled. Route guidance remains active.
"Map"
Use the command "Map" to activate or switch
to map display.
"Zoom in", "Zoom out"
Use these commands to zoom in on map or
to zoom out of map to the desired level of map
detail.
"Zoom in completely", "Zoom out
completely"
These commands are used to adapt the map
display directly to the smallest or largest map
scale.
"Read out destination memory"
Use the command "Read out destination
memory" to listen to all entries in the address
book that contain an address. If applicable
you can start route guidance to an entry.
Sample dialog:
\ Read out destination memory.
The system reads all address book
entries that include an address. When
a large number of entries is stored, the
223
Z