Mercedes-Benz 2010 CL-Class Operator's Manual page 142

216_AKB; 3; 90, en-US
d2ureepe,
COMAND telephone
140
Example illustration: Bluetooth
Currently connected # and authorized
:
L mobile phone
Mobile phone already authorized but not
;
within range (L appears in grey)
New recognized mobile phone within
=
range, not authorized yet
i When the Bluetooth
will be prompted to deauthorize a
®
Bluetooth device (
COMAND cannot find your mobile phone,
an external authorization (
may be necessary.
X
Authorizing: Choose a mobile phone that
is not authorized yet = from the
® phone list and select Options
Bluetooth
Q Authorize.
The prompt to enter the passkey appears.
The passkey is an arbitrary string of 1 to 16
digits. You have to enter the same passkey
for COMAND and the Bluetooth
you want to authorize. Refer to the operating
instructions of your mobile phone for details.
®
phone list
®
phone list is full, you
Y page 141). If
Y
page 141)
®
device that
2009-05-15T11:47:50+02:00 - Seite 140
Version: 2.11.8.1
The passkey should have at least four digits
in order to establish a secure Bluetooth
connection.
Entering a passkey in COMAND
You can enter the passkey into COMAND via
the digits in the menu bar or the telephone
keypad.
X
Entering via the menu bar: Select the
respective digits with the COMAND
controller and confirm the selection.
or
X
Entering via the telephone keypad:
Press the respective digits on the
telephone keypad.
X
Confirming: Select ¬ in the menu bar.
or
X
Press z or ; on the telephone
keypad.
X
Deleting entry: Select F in the menu bar
and press W.
or
X
Press $ on the telephone keypad.
Entering a passkey into the mobile phone
You will be prompted to enter the passkey
(identification, code) into your mobile phone
®
after the Bluetooth connection was
successful. Refer to the operating
instructions of your mobile phone for details.
X
Enter the same passkey that you have
entered into the COMAND.
i You might have to confirm the passkey on
your mobile phone. Check your mobile
phone display.
When the message Error during
authorization process. appears on
your COMAND display, you have either
exceeded the time limit or the passkey was
incorrect. Repeat the process.
The mobile phone is connected with the
COMAND (authorized). You can now make
phone calls via the hands-free function of the
COMAND.
®