Cb Radio - Icom; Getting Started - Victory 2012 Ness Signature Series Rider's Manual

CB Radio / ICOM System
CB/ICOM Introduction
In the U.S.A., refer to the Federal Commu-
nications Commission (FCC) Plain Rules
pamphlet accompanying this rider's manual
for a comprehensive guide of citizens band
(CB) radio rules and regulations.
Headset Use
The use of helmet-mounted headsets may be
restricted or prohibited in some areas.
Always obey all applicable regulations and
laws.
The headsets have three separate volume
settings: Intercom (ICOM) volume, CB
receive volume and entertainment (ENT)
volume. See page 117.

Getting Started

Tip: To minimize distractions while riding, always
make adjustments to the CB/ICOM system
prior to operating your motorcycle.
Tip: To prevent battery drain, do not leave the
key in the ACC position for long periods.
VICTORY recommends using the audio
system only when the engine is running.
The ignition key must be in the ACC or ON
position to use the audio system.
1. Press the power
button to turn the
audio system on.
2. Press COM on the
left control to acti-
vate the CB/COM
system.
120
CB Channels
When the CB radio system is active, "CB"
and the active channel will display.
FM
ICOM
CB19
Press and hold
COM on the upper
left control to
access the
CHANNEL
ADJUST screen.
Push COM or ICOM on the left control or
(+) or (-) on the console panel to change
channels.
COM
CHANNEL ADJUST
+/-
ICOM
Tip: Changing to a new channel may require
changing the squelch setting.
Press S/E on the left
control to exit the
screen and return to
the main display.
P1
100.5
CB 19
ST