Victory 2012 Ness Signature Series Rider's Manual page 29

Multi-Function Display
Engine Error Codes
The error screen displays only when the CHECK
ENGINE light is on or when it goes on and off
during one ignition cycle. Error codes are not
stored. When the key is turned OFF, the code and
message is lost, but will reappear if the fault reoc-
curs after restarting the engine.
If the CHECK ENGINE indicator lamp illumi-
nates, retrieve the error codes from the display.
1. If the error codes are not displayed, use the
mode button to toggle until "Err" displays in
the clock area.
2. Record the three code numbers displayed in
the gear position, temperature and odometer
displays.
3. See an authorized VICTORY dealer for code details and diagnosis.
Display Units (Standard/Metric)
The display can be changed to display either standard or metric units of measurement.
Tip: To exit the set-up mode at any time, wait 10 seconds.The display automatically exits and returns to
the odometer display.
Distance
Fuel
Temperature
Time
Display Units (Standard/Metric)
1. Turn the key to the OFF position.
2. Press and hold the mode button while turning the key to the ON or ACC position.
3. When the display flashes the distance setting, tap the mode button to advance to the
desired setting.
4. Press and hold the mode button to save the setting and advance to the next display
option.
5. Repeat the procedure to change remaining display settings.
Instruments, Features and Controls
Standard Display
Miles
U.S. Gallons
Fahrenheit
12-Hour Clock
Error Code
Number (0-9)
"Err"
88 :
88
Avg
88
TRIP 1
TRIP 2
Suspect Parameter Number (SPN)
Metric Display
Kilometers
I = Imperial Gallons
Celsius
24-Hour Clock
Failure Mode
Indicator (FMI)
8
1 88
F
C
Speed Range Inst Time
8 8 8 8
: :
km / h
.
miles / gal
Liter = Liters
25