Street Trim Panel Removal - Victory 2012 Ness Signature Series Rider's Manual

Maintenance

Street Trim Panel Removal

1. Remove the seat, license plate and bracket. See
page 83.
2. Open the saddlebags.
3. Working from top to bottom, lift each edge of
the tail molding to release the tabs. Lift the tail
molding just enough to provide clearance to
remove the trim panel.
4. Lift the trim panel straight upward to release
all four tabs at the corners.
5. Install the trunk. See page 85.
6. Align the tail molding. Working from bottom
to top, press at each tab to secure the molding.
7. Reinstall the license plate and seat. Tighten the
fasteners.
Torque: 36 in-lbs (4 Nm)
Street Trim Panel Installation
1. Remove the seat, license plate and bracket.
2. Open the saddlebags.
3. Working from top to bottom, lift each edge of the tail molding to release the tabs. Lift the
tail molding just enough to provide clearance to install the trim panel.
4. Remove the trunk.
5. Align the trim panel and press downward evenly to seat all four tabs in the tab slots.
6. Align the tail molding. Working from bottom to top, press at each tab to secure the mold-
ing.
7. Reinstall the license plate and seat. Tighten the fasteners.
Torque: 36 in-lbs (4 Nm)
84
Center
Tabs
Bottom
Tabs
Top
Tabs
Trim
Panel