Victory 2012 Ness Signature Series Rider's Manual page 122

Audio System Operation
Audio Mode Menus
To change mode settings, enter the mode menu. Press (+) or (-) on the console panel to
change settings. Press S/E to save and exit.
Tip: Sources and menu options will be displayed only for installed components.
ICOM Volume
Press (+) or (-) on
the console panel
to change settings.
CB Volume
Press (+) or (-) on
the console panel
to change settings.
CB LO/DX Mode
Press (+) or (-) on
the console panel
to change settings.
See page 122 for
more detailed
information.
Tuning (Seek/Scan Modes)
Press (+) or (-) on
the console panel
to set the tuner
SEEK or SCAN
mode.
Radio Data System (RDS)
Press (+) or (-) on
the console panel
to turn the radio
data system on,
off or to FULL.
ON: Station name
and song
information displays.
FULL: Additional song information
displays (if available in the radio signal).
118
+
ICOM VOL 15
-
+
CB VOL 15
-
+
CB LO / DX MODE
DISTANT
-
+
CB LO / DX MODE
LOCAL
-
+
TUNING MODE
SEEK
-
+
RDS
OFF
-
+
RDS
ON
-
AUX Mode
Press (+) or (-) on
the console panel
to set the mode to
AUX (for iPod or
any other MP3
player use) or to
NAV MP3 for
navigation unit MP3 player use.
Tip: NAV MP3 mode will override any device
connected with an input cable in the left con-
sole storage bin.
Tip: If using NAV MP3 mode, always pause the
GARMIN unit before changing sources. Oth-
erwise, music from the NAV unit will interrupt
the new source, interpreting it as navigation
commands, not music.
XM Display
Press (+) or (-) on
the console panel
to set the screen
to display
channel name or
category when
the XM radio is
active.
+
AUX MODE
AUX
-
+
AUX MODE
NAV MP3
-
+
XM DISPLAY
CHANNEL NAME
-
+
XM DISPLAY
CATEGORY
-