Victory 2012 Ness Signature Series Rider's Manual page 126

CB Radio / ICOM System
Local/Distant CB Radio Mode
To change mode
settings, enter the
mode menu. Press
(+) or (-) on the
console panel to
set the CB to local
(LO) or distant
(DX) mode. Press S/E to save and exit.
CB Radio Frequencies
The FCC has designated 40 citizen band (CB) channels for consumer use. Channel 9 is des-
ignated as an EMERGENCY channel for emergency use only.
CB Channels / Frequencies
Ch. Freq. Ch.
1 26.965 8
2 26.975 9
3 26.985 10
4 27.005 11
5 27.015 12
6 27.025 13
7 27.035 14
ICOM System
Press and release
ICOM on the left
control to activate
the intercom sys-
tem.
When the intercom
system is active, ICOM will display on the
console screen.
FM
ICOM
CB19
122
+
CB LO / DX MODE
DISTANT
-
+
CB LO / DX MODE
LOCAL
-
Freq. Ch. Freq.
27.055 15 27.135
27.065 16 27.155
27.075 17 27.165
27.085 18 27.175
27.105 19 27.185
27.115 20 27.205
27.125 21 27.125
92.5
Distant: Use this setting for weaker signals.
Receiver sensitivity will be increased. Static
and noise levels are increased.
Local: Use this setting for stronger signals
or in high density areas. Receiver sensitivity
will be decreased. Static and noise levels are
decreased.
Ch. Freq. Ch.
22 27.225 29
23 27.255 30
24 27.235 31
25 27.245 32
26 27.265 33
27 27.275 34
28 27.285 35
VOX Break Setting
The intercom is opened and closed using a
voice-operated switch (VOX). The volume
sensitivity level required to open the inter-
com can be adjusted using the VOX sensi-
tivity setting.
Press and hold
ICOM on the
upper left control
to access the VOX
sensitivity set
screen.
Freq. Ch. Freq.
27.295 36 27.365
27.305 37 27.375
27.315 38 27.385
27.325 39 27.395
27.335 40 27.405
27.345
27.355