Victory 2012 Ness Signature Series Rider's Manual page 30

Instruments, Features and Controls
Multi-Function Display
Clock
Tip: The clock must be reset any time the battery has been disconnected or discharged.
1. Turn the key to ON or ACC. Use the mode button to toggle to the odometer display.
Tip: If LOW FUEL is flashing, the display will not enter the CLOCK SET mode.
2. Press and hold the mode button until the hour segment flashes. Release the button.
3. With the segment flashing, tap the mode button to advance to the desired setting.
4. Press and hold the mode button until the next segment flashes. Release the button.
5. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments. After completing the
1-minute segment, step 4 will save the new settings and exit the clock mode.
6. Turn the key to the OFF position.
Odometer/Trip Odometer
The odometer displays the total distance traveled by the vehicle. The trip odometer displays
distance traveled since the trip odometer was reset. To view the trip odometer, turn the key to
the ON position. Use the mode button to toggle to the trip odometer.
To reset the trip odometer, toggle to the trip odometer, then press and hold the mode button
until the trip odometer resets.
Gear Position
Gear position displays only when the vehicle is moving and the clutch is engaged. If the
vehicle stops moving, or if the clutch is disengaged, "--" will show in the display.
Temperature
The key must be in the ON or ACC position to display ambient air temperature.
26