Victory 2012 Ness Signature Series Rider's Manual page 125

Push-to-Talk (PTT)
Press and hold the
top or bottom of the
PTT button to trans-
mit over CB radio.
The passenger must
push and hold the
rear PTT button.
"TX" will display on the console screen
when one of the PTT buttons is pressed.
"RX" will display when the CB is receiving
a transmission.
FM
ICOM
TX19
Transmitting
FM
ICOM
RX19
Receiving
Passenger CB Radio Volume
The passenger can control rear headset vol-
ume when Entertainment, CB radio or
ICOM is active.
Tip: Each volume setting is inde-
pendently adjustable.
Press (+) or (-) on the passen-
ger control to raise or lower
volume.
100.5
100.5
CB Radio / ICOM System
Squelch
Squelch blocks unde-
sired signals and noise
by allowing the recep-
tion of signals only
over a specified level.
Press and release
the SQ (+) or SQ
(-) buttons to
adjust the
squelch to any
level between OPEN and CLOSED.
When squelch is set to OPEN, no filtering
occurs. Setting squelch to CLOSED blocks
all signals, including strong signals.
To set the squelch level, first lower the
squelch level until noise or static is audible.
Gradually increase the squelch level until
the noise or static is gone.
Press S/E on the left
control to exit the
screen and return to
the main display.
Driver CB
Radio Volume
To change
settings, enter the
mode menu. Press
(+) or (-) on the
console panel to adjust settings. Press S/E to
save and exit.
Tip: The CB volume can also be set using the
hand control when the CB is receiving.
+
SQUELCH 8
SQ
-
+
CB VOL 15
-
121