08 Maintenance.fm Page 206 Monday, May 11, 2009 2:03 PM
Maintenance
Street Trim Panel Removal
1. Remove the seat, license plate and bracket. See
page 202.
2. Working from top to bottom, lift each edge of
the tail molding to release the tabs. Lift the tail
molding just enough to provide clearance to
remove the trim panel.
3. Lift the trim panel straight upward to release
all four tabs at the corners.
4. Install the trunk. See page 204.
5. Align the tail molding. Working from bottom
to top, press at each tab to secure the molding.
6. Reinstall the license plate and seat. Tighten the
fasteners.
Torque: 36 in-lbs (4 Nm)
206
Center
Tabs
Bottom
Tabs
Top
Tabs
Trim
Panel