Agilent Technologies E5071C ENA Service Manual page 27

Table 1-4 Recommended Test Equipment
Equipment Critical specifications
Cable 20 inch 50 ohm cable
Adapter N(m)-BNC(f) Adapter
Adapter APC 3.5 (f)-(f) Adapter
Adapter APC 2.5 (m)-N(f) Adapter
Torque Wrench Size: 3/4 inch
Torque: 136 N-cm
Personal Computer Windows XP, VEE7.5 or later
with GPIB board
*1.P: Performance Tests, A: Adjustment, T: Troubleshooting
*2.The accuracy of a standard E4419A/B of ±0.02 dB is adequate for all tests/adjustment except
"Dynamic Accuracy Test". This test requires a power meter with Option G12 or H12 that has been cer-
tified to a higer accuracy specification. If an Option G12 or H12 power meter is not available, a test is
provided on "Power Meter Accuracy Test" on page 28 to verify the accuracy of a standard power meter.
Table 1-5 Alternative Test Equipment
Equipment Critical specifications
Frequency Counter 1 Frequency: 50 MHz to 8.5 GHz
Accuracy: < 2.5 ppm
Multimeter
Function Generator
Power Sensor No Substitute
Short Type-N(m)
Load Type-N(m)
*1.P: Performance Tests, A: Adjustment, T: Troubleshooting
Chapter 1
Required Equipment
Recommended Model
Agilent p/n 8121-1834
Agilent p/n 1250-0780
Agilent p/n 85027-60005
Agilent p/n 1250-1811
Agilent p/n 8710-1766
Model
Agilent 53131/2A with Opt.010
and 124
Agilent 34401A
Agilent 34410A
Agilent 34411A
Agilent 33220A
Agilent 33250A
Agilent E9304A with Opt. H19
Agilent 11512A
Agilent 909F Opt. 012
General Information
Qty. *1
Use
1 P,T
1 P,A
4 P,A
1 P,A
1 P,A
1 P,A
Qty. *1
Use
1 P,A
1 P,T
1 P,T
1 P,T
1 P,T
1 P,T
1 P,A
4 P,T
4 P
27