Agilent Technologies E5071C ENA Service Manual page 101

Step 6. For unit (S/N: MY462XXXXX and above), enter password "agt0nly" and press
Then BIOS setup utility main menu is displayed as shown in Figure 4-29.
Figure 4-29 BIOS setup utility main menu
Step 7. The BIOS setup utility has primary menus, most of which have sub-menus. Brief
descriptions for these menus are provided in Table 4-14. It is recommended not to change
any value except for the case of replaceing CPU Mother board assembly..
Step 8. Select a desired menu using
using
NOTE If you want to exit the BIOS option setting and exit the BIOS setup utility without saving
changes in the setup, select "Exit Discarding Changes" and press
Menu.
Table 4-14
Chapter 4
To configure the CPU Mother Board Assembly and BIOS
keys. To perform an operation, use
BIOS setup utility primary menus
Menu Options
Main System Time
System Date
CPU Type
CPU Speed
System Memory
Extended Memory
keys. Select an item in the menu or sub-menu window
key.
Troubleshooting
.
key at the Exit
101