Installation
Video
►
1.
Connect the included HDMI cable from the HD source to the HDMI In port on the
HDMI to 3GSDI Converter.
2.
Connect a BNC cable from the SDI display to the SDI In port on the HDMI to 3GSDI
Converter.
USB (optional Syner-G™ software control)
►
3.
Connect a USB-to-mini USB cable from the HDMI to 3GSDI Converter to
a computer that is running the Syner-G™ Software Suite. To complete this portion
of the installation, see
required for updating the firmware.
►
Power
4.
Connect the included power supply to the 12V DC power receptacle and connect the
power cord to an available electrical outlet.
Connection Instructions
Verifying the USB Driver (page
Sample Wiring Diagram
HDMI Source
EXT-HD-3G-C
Converter
page | 4
12). This connection is
HDMI CABLE
SDI CABLE
SDI Display
or other down-
stream equipment
EXT-HD-3G-C